terewvisions.blogg.se - Backyardeos intro

#Backyardeos intro manual#
#Backyardeos intro skin#
#Backyardeos intro software#
#Backyardeos intro Pc#
#Backyardeos intro iso#

#Backyardeos intro skin#

This does not cause any problem on the camera operation but a minor burn can be caused if skin is contacted with the cooling system for extended period time.

Caution with the cooling system activated – the TEC cooling system for the image sensor is designed to emit substantial amounts of heat to outside.

Do not disassemble the camera to clean the dusts. If you see marks on your image due to the dusts on the image sensor, please contact CentralDS for servicing. However about 2 – 4 % of the customer reported dusts on the image sensor.

Image sensor dust – CentralDS tests each camera with test exposures to check the image sensor is dust free before shipping.

Silica gel) or cool, dry, well ventilated location.

#Backyardeos intro software#

EOS Utility is included in the initial software setup for your EOS camera.

Store the camera in a sealed container with desiccants (i.e. BackyardEOS - OTelescope EOS Utility also allows you to remotely operate the camera from your computer using either a USB cable, via Wi-Fi if your camera includes it or via a separate Wireless File Transmitter (excludes EOS M).

To prevent condensation, first put the camera in a sealed plastic bag and let it adjust to the warmer temperature before taking it out of the bag.

If the camera is suddenly brought in from the cold into a warm room, condensation may form on the camera and internal parts.

If condensation forms on the camera, do not use the camera.

Dew can form on the surface of the camera and this can damage the camera.

Do not leave the camera attached to a telescope with the cooling system off for long time.

If the camera is disassembled by personnel not authorized by CentralDS, the warranty will be voided.

If the airtight sealing is damaged, dew can form inside the camera.

Please use a dust blower to remove dusts on the filter.

This can result in condensation inside the camera and damages of the circuit. If the camera is disassembled by the user, moisture can get into the camera.

This camera is tightly sealed with molecular sieve, high performance desiccant to prevent dew from forming inside the camera while the cooling system is operating.

Do not leave the camera under the direct sunlight.

If you drop the camera in water, wipe off any water droplets from the camera with a dry cloth and contact CentralDS. Please do not drop and avoid any physical impact against camera.

This camera is a high precision device.

You can use this camera for personal use anywhere in the world. CentralDS will not be responsible for any inconvenience or loss due to failure of storing images to the SD card or defective images stored in the card. We provide a SD memory card to save images with the camera. Please make sure you don’t lose any of the contents. Please check a lens adapter is included if you purchased one.ģ. 12V 5A power adapter includes a power cable.Ģ.

If anything is missing, please contact CentralDS or the dealer that you purchased from.ġ. Please check following devices and accessories are all included in the package. Please read ‘Handling caution’ and ‘Safety of the user and the camera‘ thoroughly to prevent any accidents or damages to the camera.

#Backyardeos intro manual#

You will get used to this camera and understand the camera better while reading this manual and taking test images.

#Backyardeos intro Pc#

You cannot control the camera without a PC connected to the camera. You can take pictures, change settings and save images to the PC by this method. You can control the camera only by using a PC connected to the camera with a USB cable. You will be able to take astronomical images of breathtaking quality. The image sensor can be cooled maximum -28C below ambient by the installed TEC cooling module to minimize noise of pictures and movies. You can control the camera and take images by using a PC connected to the camera with a USB cable. There are no hard-and-fast rules, but Matteo has one tip based on his personal experience: "Waiting some time between each shot – perhaps even up to a few minutes, depending on the exposure time – can help to avoid excessive noise.CDS-600D and CDS-1100D are modified Canon EOS 600D and 1100D.

#Backyardeos intro iso#

A build-up of heat in the sensor increases noise in-camera functions such as noise reduction for long exposures and high ISO are obviously beneficial, but it's also important to keep the camera cool." That's one reason the Canon EOS R makes such a great foundation for an astrophotography camera: its magnesium alloy body is very efficient at dispersing heat, meaning less heat noise at long exposures. "This gives greater freedom to select an ISO based on the feature you want to capture, the specifications of the telescope being used, the precision of the targeting system and the environmental conditions, such as the temperature. "DIGIC 8 offers enhanced noise reduction, distinguishing stars from noise with precision and at a faster computational speed," explains Matteo. All aspects of the Canon EOS Ra's image processing are taken care of by the latest DIGIC 8 chip.